
Cat 259D and 299D DPF Delete: Send-In ECU Tuning for Skid Steers and Track Loaders
November 17, 2026A clogged DPF, a failed regen, or a DEF derate will sit a Cummins semi just as surely as a mechanical breakdown. The engine is usually fine. The software is what’s holding the truck back: a soot-load warning on an ISX15, a DEF quality code on an X15, or limp mode on the highway.
TM AG Tuning is based in Redcliff, Alberta. We provide DEF, DPF, and EGR tuning for Cummins X15 and ISX15 trucks remotely, so the truck can stay in your yard or on the road.
How to get started: select your truck on our Make and Model Search page. That opens a ticket, and support replies with what’s needed.
What the ISX15 and X15 Run for Emissions
The ISX15 is Cummins’ 15-liter truck engine from the 2010 model years through the mid-2010s. It uses a diesel particulate filter (DPF), selective catalytic reduction (SCR) that uses diesel exhaust fluid (DEF), and exhaust gas recirculation (EGR). Early ISX15s use a CM2250 controller. Later ISX15s use a CM2350.
In 2017, Cummins introduced the X15 as the next 15-liter truck engine, in Efficiency Series and Performance Series versions. The X15 also uses a DPF, SCR that uses DEF, and EGR. Early X15s use a CM2350 controller. Later X15s use a CM2450.
These engines are used in Class 8 trucks such as the Freightliner Cascadia, the Peterbilt 579 and 389, the Kenworth T680 and W900, and International models such as the LT. Cummins has also listed some Volvo VNL trucks as available with a Cummins engine. Western Star trucks may have a Cummins or a Detroit engine. A Western Star with a Detroit DD15 is a different job, and many Western Stars are a send-in tune, not a remote one. If you’re not sure what’s in your truck, select it on the search page and support will confirm which process applies. Some trucks need the controller sent in; support will tell you which.
Common DPF, DEF, and EGR Problems on These Trucks
Highway work, idle time, and short runs are hard on a DPF. A truck that can’t finish a regen may light the DPF lamp, start a parked regen at a bad time, or drop into derate. Owners also run into clogged filters, high exhaust backpressure, and EGR-related carbon buildup that costs power.
On ISX15 and X15 trucks, a DEF or SCR fault can do the same thing even when the DPF itself is fine: a dosing valve, a quality sensor, a heater, or an empty or contaminated DEF tank can put the truck into derate or a speed limit.
The engine is often still healthy. The aftertreatment software is what derates the truck and interrupts the day. For a broader look at limp mode, see What to Do When Your Tractor or Skid Steer Is Derated.
How the Remote Tune Works
Select your truck on our Make and Model Search page. That opens a support ticket, and support replies with what’s needed. You don’t need to send model details, serial numbers, photos, or fault codes up front.
Cummins X15 and ISX15 trucks are tuned remotely. You will need a compatible interface cable and a Windows laptop with at least 80 GB of free space and a solid internet connection. A hotspot works. The cables we work with are a Nexiq USB-Link 1, 2, or 3, a DPA 5, a Noregon DLA, or a DrewLinQ. If you don’t already have one, we sell a Cummins interface cable. The remote session uses TeamViewer; the download is on the tuning product page. That page also notes the session takes about an hour.
You can order the Cummins Heavy Duty Truck DEF, DPF, and EGR Remote Tuning service, or browse the Cummins remote tuning category. If you do more than three Cummins engines with us, dealer pricing applies.
We retune the ECU so the truck no longer looks for the DPF, the SCR system, or the EGR. Some newer dashes may show the DEF level as empty. We try to fake the DEF level where possible.
The work is covered by our lifetime software warranty. If a dealer reflash overwrites the calibration, or the controllers are replaced, we re-tune them for free.
For a general look at remote work, see How Remote Tuning Works for Agricultural and Construction Equipment.
Horsepower Options for the ISX15 and X15
We can add power to the ISX15 and X15 we work on, with or without a delete. Just ask support. The heavy-duty truck product includes a free upgrade to the maximum manufacturer setting for your CPL (critical parts list) if you ask for it.
The Cummins remote tuning page lists factory and custom horsepower by CPL. Start with your CPL number to compare the ratings. As that page puts it: factory HP is the highest factory-rated horsepower for your engine, and TM AG Custom HP is the horsepower level we have tested on the truck. The ISX15 and X15 entries from that table are below. If your CPL says “Ask us,” or it isn’t listed, select your truck on the search page and support will confirm what’s available. Other Cummins engines are on the same page.
| Engine | ECM | CPL | Factory HP / torque | TM AG Custom HP |
|---|---|---|---|---|
| ISX X15 | CM2350A | 4342 | 500 HP / 1,850 lb-ft | Ask us |
| ISX X15 | CM2350A | 4343 | 565 HP / 1,850 lb-ft; 600 HP / 1,850 lb-ft; 600 HP / 2,050 lb-ft | 650 HP |
| ISX | CM2350 | 3937 | 475 HP / 1,650 lb-ft | 500 HP; 520 HP |
| ISX | CM2350 | 3938 | 500 HP / 1,850 lb-ft | 550 HP |
| ISX | CM2350 | 3939 | 550 HP / 1,850 lb-ft; 600 HP / 1,850 lb-ft; 600 HP / 2,050 lb-ft | 630 HP; 650 HP |
| ISX | CM2350 | 4583 | 450 HP / 1,750 lb-ft | 530 HP |
| ISX | CM2350 | 4584 | 500 HP / 1,850 lb-ft | Ask us |
| ISX | CM2350 | 4585 | 600 HP / 1,850 lb-ft; 600 HP / 2,050 lb-ft | 650 HP |
| ISX | CM2350 | 4586 | 450 HP / 1,750 lb-ft; 475 HP / 1,650 lb-ft | Ask us |
| ISX | CM2350 | 4587 | 500 HP / 1,850 lb-ft | 550 HP |
| ISX | CM2350 | 4588 | 600 HP / 1,850 lb-ft; 600 HP / 2,050 lb-ft | 630 HP |
| ISX | CM2250 | 3349 | 600 HP / 2,050 lb-ft | Ask us |
| ISX | CM2250 | 3348 | 500 HP / 1,650 lb-ft | Ask us |
| ISX | CM2250 | 3439 | 385 HP / 1,450 lb-ft | Ask us |
| ISX | CM2250 | 3490 | 450 HP / 1,750 lb-ft | Ask us |
| ISX | CM2250 | 3491 | 500 HP / 1,850 lb-ft | Ask us |
| ISX | CM2250 | 3606 | 600 HP / 1,850 lb-ft; 600 HP / 2,050 lb-ft | Ask us |
| ISX | CM2250 | 3719 | 450 HP / 1,750 lb-ft | 500 HP |
| ISX | CM2250 | 3688 | 500 HP / 1,650 lb-ft | 600 HP |
| X15 | CM2450 | 5348 | 500 HP / 1,650 lb-ft; 500 HP / 1,850 lb-ft | 550 HP; 600 HP |
| X15 | CM2450 | 5349 | 605 HP / 1,850 lb-ft; 605 HP / 1,950 lb-ft; 605 HP / 2,050 lb-ft | 650 HP |
| X15 | CM2450 | 5479 | 565 HP / 1,850 lb-ft; 565 HP / 2,050 lb-ft | 650 HP |
| X15 | CM2450 | 5779 | 500 HP / 1,650 lb-ft; 500 HP / 1,850 lb-ft | 565 HP |
| X15 | CM2450 | 5879 | 605 HP / 1,850 lb-ft; 605 HP / 1,950 lb-ft; 605 HP / 2,050 lb-ft | 650 HP |
| X15 | CM2450 | 5880 | 565 HP / 1,850 lb-ft; 565 HP / 2,050 lb-ft | 600 HP; 640 HP |
Related Cummins and Truck Pages
- Cummins DEF, DPF, and EGR Delete: Our broader Cummins page.
- Freightliner Cummins DEF, DPF, and EGR Delete: Remote tuning for Freightliner trucks with Cummins engines, including the Cascadia.
- Peterbilt 579 and Peterbilt trucks: Remote Cummins tuning for Peterbilt.
- Kenworth trucks: Remote Cummins tuning for Kenworth.
- Western Star trucks: Western Star jobs are often a send-in tune. Support will confirm the process for your truck.
Frequently Asked Questions
Are Cummins X15 and ISX15 trucks tuned remotely?
Yes. These Cummins trucks are tuned remotely with a compatible interface cable and a Windows laptop. Select your truck on the search page to get started. Some trucks, including many Western Stars and trucks with a Detroit engine, need the controller sent in. Support will tell you which process applies.
What cable and laptop do I need?
You need a Nexiq USB-Link 1, 2, or 3, a DPA 5, a Noregon DLA, or a DrewLinQ, plus a Windows laptop with at least 80 GB of free space and a solid internet connection. A hotspot works. If you don’t have a cable, we sell a Cummins interface cable.
Can I get more horsepower too?
Yes. We can add power, and the heavy-duty truck product includes a free upgrade to the maximum manufacturer setting for your CPL if you ask. Custom levels we have tested are listed by CPL on the Cummins remote tuning page. We don’t publish other gains.
How do I get started?
Select your truck on our Make and Model Search page. That opens a support ticket, and support replies with what’s needed. You don’t need to gather model details, serial numbers, photos, or fault codes before you start. You can also order Cummins Heavy Duty Truck DEF, DPF, and EGR Remote Tuning.
What if a dealer flash wipes the tune?
It’s covered by our lifetime software warranty. If a dealer reflash overwrites the calibration, or the controllers are replaced, we re-tune them for free.
Do more than three Cummins engines qualify for dealer pricing?
Yes. If you do more than three Cummins engines with us, dealer pricing applies. Select your truck on the search page or see Become a TM AG Tuning Dealer for more on dealer work.
Get Your Cummins X15 or ISX15 Looked At
If your X15 or ISX15 keeps throwing DPF, DEF, or EGR codes, gets stuck in regen or derate, or you want a software delete and more power, select your truck on our Make and Model Search page. That opens a ticket, and our support team replies with what’s needed.
TM AG Tuning
Redcliff, Alberta T0J 2P2 · Agricultural, Construction & Heavy Equipment ECU Tuning
1-888-630-7226 · [email protected]
Related pages: How Remote Tuning Works · When Your Machine Is Derated · Warranty and Refund Policy · Cummins Heavy Duty Truck Remote Tuning
