
Kubota DPF Delete: Remote Tuning for Tractors, Track Loaders, and Excavators
November 17, 2026
Cummins X15 and ISX15 DEF DPF EGR Tuning for Semi Trucks
November 17, 2026A clogged DPF, a failed regen, or a DEF derate will sit a Cat compact track loader just as surely as a mechanical breakdown. The engine is usually fine. The software is what’s holding the machine back: a soot-load warning on a 259D, a parked regen that won’t finish, or limp mode on a 299D2 after a DEF quality code.
TM AG Tuning is based in Redcliff, Alberta. These Cat 259D and 299D jobs are done on the bench: the ECU is shipped in, and the machine stays on your farm or job site.
How to get started: select your machine on our Make and Model Search page. That opens a ticket, and support replies with the ship-in steps and prepaid labels.
What the 259D and 299D Run for Emissions
The 259D and 299D are compact track loaders, often searched as skid steers. What they use for emissions depends on the model, not just the badge on the machine.
The 259D and 259D3 use a Cat C3.3B turbo diesel, a diesel particulate filter (DPF), and exhaust gas recirculation (EGR). They do not have a diesel exhaust fluid (DEF) tank. On these machines, the usual complaints are DPF regen cycles, soot-load warnings, and EGR-related power loss or derate.
The original 299D uses a larger Cat C3.8 turbo diesel with a DPF and EGR, and no DEF tank.
The 299D2, 299D3, and 299D3 XE keep the C3.8 and the DPF, and add selective catalytic reduction (SCR) that uses DEF. On these, you can get both DPF faults and DEF or SCR problems: a dosing valve, a quality sensor, a heater, or an empty or contaminated DEF tank that puts the machine into derate. The 299D3 XE is the higher-output 299D3 and also uses DEF with SCR.
If you’re not sure what’s on your machine, select it on the search page and support will confirm. We handle both setups: DPF and EGR deletes on machines that don’t use DEF, and DEF, DPF, SCR, and EGR deletes on machines that do.
Common DPF Problems on These Machines
These loaders work in dirt, snow, and short cycles, which is hard on a DPF. A machine that spends a lot of time idling or making short runs may not get the exhaust hot enough to finish a regen. The DPF light comes on, a parked regen starts in the middle of a job, or the regen fails and the machine drops into derate.
Owners also run into clogged filters, high exhaust backpressure, and EGR-related carbon buildup that costs power. On 299D2 and 299D3 machines, a DEF or SCR fault can do the same thing even when the DPF itself is fine.
The engine is often still healthy. The aftertreatment software is what derates the machine and interrupts the day. For a broader look at limp mode, see What to Do When Your Tractor or Skid Steer Is Derated.
How the Send-In ECU Tune Works
Select your Cat on our Make and Model Search page. That opens a support ticket, and support replies with the ship-in steps and prepaid labels. You don’t need to send model details, serial numbers, photos, or fault codes up front.
These machines are tuned on the bench, so the ECU has to be shipped in. The 259D, 259D3, and the original 299D send the ECU. DEF and SCR machines — the 299D2, 299D3, and 299D3 XE — send the ACM and the ECU.
We pay for the shipping and use UPS Express Saver. Prepaid labels are emailed to you; you just print them off. We deal with customs. It takes 2–3 days to get to us and 2–3 days to get back to you.
We retune the ECU so the machine no longer looks for the DPF, and on DEF-equipped 299D2 and 299D3 machines, no longer looks for the SCR system either. Once the work is done, the controller is shipped back to you.
The work is covered by our lifetime software warranty. If a dealer reflash overwrites the calibration, or the ECU is replaced, we re-delete it for free.
We can also add horsepower to any 259D or 299D we work on, with or without a delete. Just ask support. We don’t publish specific power or fuel figures, because they depend on the machine.
The Cat 299 DPF Replacement Pipe (299D2 and 299D3 Only)
We also offer a Cat 299 DPF replacement pipe with muffler. It is a stainless pipe built as a DPF replacement for SCR-equipped 299D2 and 299D3 machines, including the 299D3 XE.
This pipe fits the 299D2 and 299D3 only. It will not fit the original 299D, a 259D, a 259D3, or any other Cat model. The original 299D, the 259D, and the 259D3 are a software-only job; we don’t currently offer a matching pipe for those machines.
The software tune is still the core of the service, and every job starts on the search page.
ECU Tuning vs. a Plug-In DPF Delete Kit
A lot of “Cat 259D DPF delete kit” listings are plug-in emulators. They mimic temperature and pressure sensors so the ECU thinks the filter is still there after the DPF is removed. That can leave the original software in place, with its regen logic, derate maps, and fault monitoring still running.
TM AG Tuning’s main service is a software calibration, not a plug-in kit. We retune the ECU itself on the bench, which means the controller is shipped in. On a 259D, a 259D3, or the original 299D, that software work is the service. On a 299D2 or 299D3, the software tune can be paired with the pipe above. Start on the search page and support will tell you what your machine needs.
Related Cat Skid Steer and Track Loader Pages
We already have pages for two related Cat machines, plus a broader Caterpillar hub:
- Cat 246D: Wheeled skid steer with a DPF and EGR, and no DEF.
- Cat 289D: Compact track loader with a DPF and EGR, and no DEF.
- Caterpillar Equipment DEF, DPF, and EGR Delete: Our Cat hub, covering a wider range of excavators, dozers, loaders, and other machines.
Other D-series and D3 skid steers and compact track loaders, including models such as the 226D, 236D, 242D, 262D, 272D, 279D, and 297D, can be selected on the search page even if they don’t have a dedicated article yet.
Frequently Asked Questions
Do the Cat 259D and 299D use DEF?
The 259D, 259D3, and the original 299D use a DPF and EGR, and do not have a DEF tank. The 299D2, 299D3, and 299D3 XE add SCR that uses DEF, along with the DPF. If you’re not sure, select your machine on the search page and support will confirm.
Do you sell a Cat 259D DPF delete kit?
People searching for a kit are often looking at plug-in emulators that fool the sensors. Our main service is a software calibration that retunes the ECU on the bench. The 259D, 259D3, and the original 299D are software only. For the 299D2 and 299D3, we also offer a stainless DPF replacement pipe that fits those SCR machines only. Start on the search page and support will tell you what your machine needs.
Will the 299D pipe fit my 259D?
No. The Cat 299 pipe is for 299D2 and 299D3 SCR machines only. It will not fit a 259D, a 259D3, or the original 299D.
Do I have to send in the ECU?
Yes. These machines are tuned on the bench, so the ECU has to be shipped in. On 299D2 and 299D3 machines, the ACM is sent in with the ECU. Select your machine on our Make and Model Search page. That opens a support ticket, and support replies with the ship-in steps and prepaid labels. You don’t need to gather model details, serial numbers, photos, or fault codes before you start.
Can I get more horsepower too?
Yes. We can add power to every 259D and 299D we work on, with or without a delete. Just ask support when you open your ticket. We don’t publish specific gains, because they depend on the machine.
What if a dealer flash wipes the tune?
It’s covered by our lifetime software warranty. If a dealer reflash overwrites the calibration, or the ECU is replaced, we re-delete it for free.
Get Your Cat 259D or 299D Looked At
If your 259D or 299D keeps throwing DPF, DEF, or EGR codes, gets stuck in regen or derate, or you want a software delete and more power, select your machine on our Make and Model Search page. That opens a ticket, and our support team replies with the ship-in steps and prepaid labels.
TM AG Tuning
Redcliff, Alberta T0J 2P2 · Agricultural, Construction & Heavy Equipment ECU Tuning
1-888-630-7226 · [email protected]
Related pages: When Your Machine Is Derated · Warranty and Refund Policy · Caterpillar Equipment DEF, DPF, and EGR Delete
