
Yanmar Excavators and Wheel Loaders DPF and EGR Delete with TM AG Tuning
September 25, 2025
Avant 850 & Avant 750 DOC and EGR Delete Tuning – Performance Upgrade to 80HP
October 17, 2025If you own or operate a Manitou telehandler, skid steer, or loader, you already know how dependable these machines can be until emissions systems start causing problems. Frequent regenerations, power loss, and downtime from the DEF, DPF, and EGR systems can cost you valuable time and money.
At TM AG Tuning, we offer professional DEF, DPF, and EGR delete tuning for Manitou equipment, helping owners improve reliability, increase performance, and eliminate costly emissions-related issues.
Why Choose TM AG Tuning for Your Manitou?
TM AG Tuning specializes in agricultural and construction equipment tuning. We’ve worked with hundreds of machines across North America and understand the unique challenges that come with Manitou’s emissions setups.
Our team provides two tuning options depending on the engine type:
- Deutz engines – We send a tuner in the mail, allowing you to complete the tuning process remotely without removing the ECU.
- All other engines – The ECU will need to be sent to TM AG Tuning for bench tuning. This allows us to read, modify, and reprogram the ECU directly for the best performance and reliability.
What Are DEF, DPF, and EGR Systems?
Before deleting them, it’s important to understand what each of these systems does and why they often cause issues:
- Diesel Exhaust Fluid (DEF)
The DEF system injects urea fluid into the exhaust stream to reduce nitrogen oxide (NOx) emissions. While effective for emissions, the DEF system can fail due to:
- Crystallized DEF in lines and injectors
- Sensor and pump failures
- Fault codes that derate the machine
- Diesel Particulate Filter (DPF)
The DPF traps soot from exhaust gases and periodically performs a regeneration cycle to burn off the build-up. Common DPF issues include:
- Failed regenerations
- Excessive fuel consumption during regen
- Backpressure buildup causing power loss
- Exhaust Gas Recirculation (EGR)
The EGR system recirculates exhaust gases back into the intake to reduce emissions. However, it can lead to:
- Carbon buildup in the intake and valves
- Reduced engine efficiency
- Frequent maintenance requirements
Benefits of a Manitou DEF, DPF, and EGR Delete
By removing the emissions restrictions through custom tuning, you can expect noticeable improvements in performance and reliability.
✔ Increased Power and Torque
Your engine will run more efficiently without exhaust restrictions, giving you more usable power and throttle response.
✔ Reduced Downtime
No more forced regens, DEF system errors, or derates that stop your machine in the middle of a job.
✔ Lower Operating Costs
Save money on DEF fluid, DPF filter replacements, and costly emission-related repairs.
✔ Improved Fuel Economy
With optimized engine tuning, fuel is used more efficiently, helping you reduce overall fuel consumption.
✔ Longer Engine Life
By eliminating excessive exhaust heat and soot buildup, your engine components experience less stress and wear.
How TM AG Tuning Deletes the DEF, DPF, and EGR on Manitou Equipment
Our tuning process depends on the engine model in your Manitou equipment.
🔹 For Deutz Engines
If your Manitou is powered by a Deutz engine, we make the process simple and convenient:
- We ship a tuner to you with detailed step-by-step instructions.
- You connect the tuner to your machine and upload the factory file.
- Send the file back to us via email.
- We modify the file for DEF, DPF, and EGR delete.
- You re-flash your ECU using the same tuner with our tuned file.
No need to remove the ECU or ship anything—just plug in and tune directly on-site.
🔹 For All Other Engine Types
If your Manitou runs on another engine brand (such as Perkins, Yanmar, Kubota, etc.), we’ll need the ECU sent in for bench tuning:
- Remove the ECU from your machine.
- Ship it to TM AG Tuning.
- Our team reads, modifies, and reprograms your ECU for DEF, DPF, and EGR removal.
- We return the ECU fully tuned and ready to install.
This method ensures complete access to the ECU for a perfect, reliable tune every time.
Supported Manitou Equipment
We offer tuning solutions for a wide range of Manitou equipment, including:
- Manitou Telehandlers
- Manitou Skid Steers
- Manitou Wheel Loaders
- Manitou Articulated Loaders
- Manitou Forklifts
If you’re unsure which engine your Manitou has, our team can help identify it and recommend the correct tuning method.
Why Delete with TM AG Tuning?
- ✅ Professional-grade tuning tools and software
- ✅ Safe and proven delete files customized for your machine
- ✅ Remote Deutz tuning – no downtime waiting for ECU shipping
- ✅ Fast turnaround for ECU mail-in tuning
- ✅ Experienced technicians specializing in agricultural and construction equipment
Get Your Manitou Tuning Started
Stop wasting time and money on endless emission problems. TM AG Tuning can help you get your Manitou running stronger, cleaner, and more efficiently with a professional DEF, DPF, and EGR delete tune.
Whether you need a tuner mailed for your Deutz engine or want to send in your ECU for bench tuning, our process is fast, simple, and proven.
📞 Contact TM AG Tuning today to schedule your Manitou tuning or learn more about your specific model.
🚜 Unlock your machine’s full potential — with TM AG Tuning.
